[China Glass Net] Anything that is used only is not maintained, and things that are strong will gradually damage. So learning to care for the things around you is also a must-have course in life. People often think that this is a small problem in the maintenance of doors and windows. However, it is not known that the maintenance of doors and windows in accordance with the correct method will leave a safety hazard. Q195 Epoxy Coated Wire Mesh,Epoxy Coated Welded Wire Mesh,Epoxy Coated Welded Wire Fabric,Epoxy Wire Mesh YingKaiMo Metal Net Co.,Ltd. , https://www.ykmmetalnet.com
1. Do not hang heavy objects on the door leaf and avoid sharp bumps and scratches. Do not use excessive force when opening or closing the door leaf.
2. Do not open the door lock with wet hands or splash corrosive solvents on the wooden door and door lock. Do not use excessive force when opening the door lock or turning the door lock handle. Frequently moving hardware such as hinges, door locks, etc., should be tightened immediately when loose. When the door lock is not working properly, you can lubricate the key hole with a proper amount of pencil core and other lubricants.
3. When wiping the glass, do not allow the cleaning agent or water to penetrate into the gap of the glass bead to avoid deformation of the bead. Do not use excessive force when wiping the glass to avoid damage to the glass. Be sure to ask a professional for repair after the glass is damaged.
4. When removing the stain on the surface of solid wood composite doors and windows (such as fingerprints), use a soft cotton cloth to wipe the test, and it is easy to scratch the surface with a hard cloth. When the stain is too heavy, use a neutral detergent, toothpaste or furniture-specific cleaning agent to remove the stain and then dry it. Do not rinse with water. Note that immersed neutral detergent or water-based rags should not be placed on the surface of the wooden door for a long time, otherwise the surface will be immersed and the surface finish material will be discolored or peeled off. Be careful not to rub too much on the corners of solid wood composite doors and windows, otherwise it will cause the corner paint to fall off. When removing dust from solid wood composite doors and windows, use a vacuum cleaner to remove them when not using a soft cotton cloth. In order to maintain the gloss and service life of the wooden door, it should be cleaned and dusted regularly. The surface of the wooden decoration product can be used to maintain the surface. The joint surface and the lock are movable parts. When loosening occurs, they should be tightened immediately. The sound of the hinge position should be filled in time. When the lock is opened, it is not flexible. You can add the appropriate amount of pencil core to the keyhole. Do not fill the oil. Due to the characteristics of shrinkage and swelling of wood, in the case of large differences in temperature and humidity, such as slight cracking or shrinkage, this is a normal natural phenomenon, do not panic, with seasonal changes, this phenomenon will Naturally disappears. In order to maintain the bright color of the wooden door, it should be waxed regularly for maintenance.
5, aluminum alloy doors and windows maintenance knowledge: (1) use aluminum alloy doors and windows, push and pull movements should be light, found that there are difficulties, do not hard pull hard push, should first troubleshoot. Ash accumulation and deformation are the main reasons for the difficulty in pushing and pulling aluminum alloys. Keep the door frame clean. In particular, the cleaning of the push-pull groove can be used to vacuum the ash in the tank and the door seal. (2) When cleaning, people should not step on the aluminum frame, and do not push the frame to support.
6, aluminum alloy doors and windows can be cleaned with a soft cloth dampened with water or a neutral detergent, do not use ordinary soap and washing powder, but also can not use decontamination powder, toilet detergent and other strong acid and alkali detergent, strictly prohibited with acid, alkali, salt Contact with other substances.
7. After the rainy day, the wet glass and door and window frame should be wiped out in time, paying special attention to drying the chute. The chute is used for a long time, the friction is increased, and a little oil or a layer of fire wax oil can be added.
8. Always check the joints of the aluminum alloy frame, tighten the bolts in time, and replace the damaged parts. Loosen the vulnerable parts of aluminum alloy doors and windows such as shaft pins, wind braces, and floor springs. Always check them regularly and keep them clean and flexible. Always check the joints of the frame and tighten the loose screws.
9. Sealing tops and glass seals are the key structures to ensure the sealing and heat preservation of doors and windows. If they fall off, they should be repaired and replaced in time.